DJI ROMO P2 Water Tank

ACTIVE

Cleaning Robots

DJI Home; setup includes Bluetooth pairing and Wi-Fi connection. App functions can change with software versions.

Front buffer bumper.

Defined on the map; the robot increases suction in these areas.

Front 3D ToF LiDAR and side 3D ToF LiDAR; combined with binocular fisheye vision sensors.

DJI ROMO P2 ×1

Map updates during cleaning. Rebuild it after major furniture changes; small changes do not require remapping.

The control system can lift mop pads, re-mop areas and boost carpet suction according to the cleaning task. Test results depend on environment, usage and firmware.

20 V

35 W

CRR2P

Transparent

4.9 kg.

Replace every 120 working hours. Intervals may change: follow current DJI Home maintenance prompts.

2.5 h: laboratory conditions, 25 °C, 0→100%, robot docked, drying disabled. Results depend on environment, usage and firmware.

123°; built-in LiDAR guides adaptive arm reach. Test results depend on environment, usage and firmware.

14.4 V

Microphone and speaker.

72 Wh

55 W

Vacuum & Mop; Vacuum; Mop; Vacuum Then Mop.

DJI Home supports room or map-area selection, with suction power and cleaning method set per room. Vacuum Then Mop is recommended for first cleaning.

Front infrared sensor.

Mapping is required before first cleaning: the robot leaves the station, maps the premises and returns; the map can then be adjusted.

Say “OK ROMO” after enabling Voice Activation in DJI Home, or hold the station button for 3 s while the robot is powered on and docked. Unavailable in some countries pending firmware support.

2.4000–2.4835 GHz: <20 dBm; 5.150–5.350: <23 dBm; 5.470–5.725: <23 dBm; 5.725–5.835: <14 dBm. Permitted frequencies depend on country and local regulations.

802.11b/g/n, 802.11a/n/ac

Replace every 180 working hours. Intervals may change: follow current DJI Home maintenance prompts.

5000 mAh

2.400–2.4835 GHz: <10 dBm

Charging electrodes, docking detection sensor, clean water fill port and docking alignment port.

2000 cm² stated area of the built-in dust-revealing light.

Enabled in DJI Home. Requires discernible surface texture and lighting≥0.1 lux; the same light limit applies to transparent liquids.

215 ml

Not water resistant; keep in dry areas and avoid liquid contact.

5.0

Cliff sensors, an ultrasonic sensor and a mop pad swing-arm sensor.

Replace every 300 working hours; replace immediately if debris causes jamming. Intervals may change: follow current DJI Home maintenance prompts.

351×351×98 mm

Remove cords and hanging fabrics; fence off robot-height objects, glass and mirrors or set no-go zones. Fill light turns on in low light.

ROMO ×1

36000 Pa: maximum fan pressure in laboratory testing.

≈54 dBA in Vacuum & Mop mode; controlled testing, results depend on environment, usage and firmware.

Video and voice calls through DJI Home.

3 h: vacuum only, Quiet mode, 25 °C, battery 100→12%. Results depend on environment, usage and firmware.

Up to 4 cm; capability depends on environment, usage and firmware.

Recharge every 3 months during prolonged storage with the station unplugged; store and operate at 0…40 °C.

Automatic firmware updates can be enabled in DJI Home; interface and function availability depend on installed version.

Clear hair from the mop roller; the replaceable pad uses hook-and-loop fastening.

As low as 38 dBA during quiet mopping in controlled testing; not the noise level of vacuuming or station operation. Test results depend on environment, usage and firmware.

Two side brushes with dual-tuft bristles and overlapping sweep coverage. Test results depend on environment, usage and firmware.

ROMO, white bottle ×1

Replace every 60 working hours; single-use, do not reuse. Intervals may change: follow current DJI Home maintenance prompts.

≈36 min of Vacuum & Mop after the stated30-minute recharge; not full-battery runtime.

ROMO, white bottle ×1

Rinse with clean water; reinstall only after thorough air-drying.

Indoor cleaning only, including household and similar areas, staff kitchens in offices and shops, and hotel environments. Do not vacuum standing water, gasoline, nails or cigarettes.

Lowers to create a partial seal against the carpet surface. Test results depend on environment, usage and firmware.

Manufacturer test claim: cables and pet pads as thin as 2 mm can be detected. Before cleaning, the manual still requires removing cords and fencing off glass and mirrors. Test results depend on environment, usage and firmware.

ROMO 2 Series ×1

DJI ROMO P2 ×1

Areas can be added or skipped during cleaning; a report is available after completion, including the history of interrupted tasks.

Matte textured surfaces with reflectivity>20%; lighting≥0.1 lux. Avoid mirrored and highly reflective surfaces.

20 V DC, 2.5 A

Clean water only, below the MAX line; secure the release latch after filling.

0% in laboratory testing with 1 g of hair; reference result, not a guarantee against tangling in all conditions.

CRB2P

Robot and station are pre-paired in the supplied package.

Up to 8.5 cm total: first step≤4 cm and20-22 cm wide, second step≤4.5 cm. Laboratory result depends on environment, usage and firmware.

Wheels, universal wheel and fill light.

Soft rubber roller brush, side brushes, mop pad holders, mop-pad swing arm and brush guard.

≈40 dBA during drying; controlled testing, results depend on environment, usage and firmware.

Transparent

10 kg

<0.5 W; activated by selecting Power Off in the app.

Replace every 180 working hours. Intervals may change: follow current DJI Home maintenance prompts.

Regularly inspect the washboard and wipe it with a damp cloth when dirty; periodically inspect the waste water outlet baffle.

≈18 Wh in 30 min; laboratory,25 °C, robot docked, drying disabled. Results depend on environment, usage and firmware.

Camera and microphone can be disabled in DJI Home; shared personal data can be deleted.

2.400–2.4835 GHz: <10 dBm. Permitted frequencies depend on country and local regulations.

4 L

Supported

Supported

55 W

2.4 L

3.2 L

Base station is not water resistant; keep in a dry area.

≈178 m² in ≈3 h in Vacuum/Quiet mode; starts at 100%, remaining ≈12%. Manufacturer example; results depend on conditions.

5.1

Supported

80 °C is stated in the station comparison; temperature at every contact point is not established.

Nanocrystalline surface; four high-pressure water jets and a 16 mm waste suction port. Test results depend on environment, usage and firmware.

Remove tangled debris and clean the slot; reinstall brushes according to their color markings.

425×453×440 mm

Left and right brushes have different bristle orientations; match them to the correct side.

The wheel module can be removed for hair clearing and reinstalled.

Drying-fan air inlet and dust-collection-fan air outlet.

5…40 °C

<2 W in Power Saving Mode. Power disconnects when fully charged and resumes charging when battery falls to 95%.

Announced for Q4 2026: DJI Home internet disconnection to prevent photo and video syncing. Actual availability depends on firmware.

7.8 cm wider reach and 4.5 cm deeper mopping under floating furniture than the previous generation. Test results depend on environment, usage and firmware.

Front module combines binocular fisheye lenses and LiDAR; a LiDAR sensor is also identified at the rear.

220–240 V AC, 50–60 Hz

32 acoustic noise-reduction materials, insulation pads and muffler chambers along the motor-to-air-outlet path. Test results depend on environment, usage and firmware.

0…40 °C

The app prompts when the tank is full; remove, empty and rinse the tank.

Supported.

Claimed100% along straight walls, including suspended straight walls; not a guarantee of removing all dirt from every corner in all conditions.

Level unobstructed surface with reliable Wi-Fi; more than 5 cm on each side and more than 1 m in front. Protect from direct sunlight and rain.

Theoretical up to 365 days without servicing the station washboard only, in laboratory testing. Water replenishment and consumable replacement are excluded. Actual home results may differ.

635 W

Dust collection port, guiding pins, charging electrodes, clean water fill port, waste water outlet baffle, washboard and base plate.

Removable clean and waste water tanks with release latches; waste tank float. Plumbed water connections belong to a different version.

Mop pad washing, dust collection and drying are configured in the app.

110 W

P2 only; floor deodorizer is sold only in selected countries and regions.

1100 W