← Back to Robots
About JAKA Pro5
JAKA Pro5 is a collaborative arm for small parts in production areas where protection from dust and moisture matters.
Manufacturer
Key Specifications
Reach
954 mm
Status
ACTIVE
Category
Collaborative Robots and Manipulators
Arm / Axes
6
Arm / Model
JAKA Pro5
Arm / Reach
95.4 cm
Arm / Humidity
0–100 % RH (Non-condensing.)
Arm / Mounting
Any orientation
Arm / Materials
Aluminium alloy, PC
CAB2.1 IPC / CPU
Intel Celeron J1900, 1.99 GHz
CAB2.1 IPC / RAM
DDR3L 2G
Tool / Connector
M8
Arm / Programming
Graphical, hand-guided
Tool / I/O supply
12/24 V DC
CAB2.1 IPC / Drive
64G
Joints / J1: range
±360 °
Joints / J1: speed
180 °/s
Joints / J2: range
−85…+265 °
Joints / J2: speed
180 °/s
Joints / J3: range
±175 °
Joints / J3: speed
180 °/s
Joints / J4: range
−85…+265 °
Joints / J4: speed
180 °/s
Joints / J5: range
±360 °
Joints / J5: speed
180 °/s
Joints / J6: range
±360 °
Joints / J6: speed
180 °/s
Arm / Base diameter
15.8 cm
Arm / Rated payload
5 kg (Permitted load depends on centre-of-gravity offset from the flange.)
Arm / Repeatability
±0.02 mm
Cables / Robot cable
6 m
Arm / Body protection
IP68
Arm / Operator device
PC, tablet, smartphone
Controller CAB7 / HSI
External encoder input (For conveyor tracking; an encoder is not stated as supplied.)
Tool / Digital inputs
2 channels
Tool TIO V3.0 / RS485
2 channels (TIO V3.0: multiplexed with DO1/DO2 and AI1/AI2.)
Arm / Peak consumption
2000 W
Tool / Analogue inputs
2 channels
Tool / Digital outputs
2 channels
Base loads / Maximum Fx
470 N (Maximum values are not reached simultaneously.)
Base loads / Maximum Fy
470 N (Maximum values are not reached simultaneously.)
Base loads / Maximum Fz
490 N (Maximum values are not reached simultaneously.)
Base loads / Maximum Mx
490 N·m (Maximum values are not reached simultaneously.)
Base loads / Maximum My
490 N·m (Maximum values are not reached simultaneously.)
Base loads / Maximum Mz
400 N·m (Maximum values are not reached simultaneously.)
Controller CAB7 / Model
CAB7
Controller CAB7 / RS485
External-device connection
Controller CAB7 / Wi-Fi
Built-in module
Flange / Maximum torque
34 N·m
Safety / Function count
28 (JAKA App version1.7 and later; version1.5 supports a subset.)
Safety / Function level
PL d / Cat.3 (Functions with the controller; the full installation requires its own risk assessment.)
Tool / TIO cable length
40 cm
Tool TIO V3.0 / DI mode
PNP / NPN
Tool TIO V3.0 / DO mode
PNP / NPN / Push-pull
CAB2.1 IPC / Board ports
1×USB3.0, 3×USB2.0, 2×Ethernet, 1×VGA, 1×HDMI (Internal board ports; user access to all ports is not stated.)
Complete set / Robot arm
1 pc (When purchasing a complete set.)
Complete set / TIO cable
1 pc (When purchasing a complete set.)
Controller CAB7 / USB P9
Internal debugging (Not a standard user interface.)
Controller CAB7 / Weight
15.4 kg
Tool / Maximum TCP speed
3 m/s
Tool / Typical TCP speed
1 m/s
Tool TIO V3.0 / AI range
0–10 V
Arm / Average consumption
350 W
Operation / Control stick
Power, enable, start/stop, reset, pause, lock, emergency stop
Recommendations / Warm-up
At ambient temperature <10°C
Safety / Function classes
Emergency/safeguard stop, motion status, manual mode, speed, torque/power, collision and position
Complete set / Robot cable
1 pc (When purchasing a complete set.)
Controller CAB7 / Material
Powder-coated carbon steel
Operation / Flange buttons
Free / Point (Hand guiding and recording a point in the App.)
Storage / Storage humidity
20–85 % RH (Non-condensing.)
Tool TIO V3.0 / DO current
≤1 A
Arm / Operating temperature
0–50 °C
Controller CAB7 / Protocols
TCP/IP, Modbus TCP, Modbus RTU
Operation / Tool-end button
Pause / resume
Cables / Control stick cable
6 m
Complete set / Control stick
1 pc (When purchasing a complete set.)
Controller CAB7 / I/O supply
24 V DC
Controller CAB7 / Power cord
3 m
Controller CAB7 / Protection
IP44
Controller CAB7 / Safety I/O
Paired DI/DO (Configured from general digital channels; not additional I/O.)
Arm / Weight including cables
23 kg
Complete set / Safety leaflet
1 pc (When purchasing a complete set.)
Safety functions / SF8: Power
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Storage / Storage temperature
−10–50 °C (Non-condensing.)
Complete set / Cabinet and key
1 pc (When purchasing a complete set.)
Controller CAB7 / Analogue I/O
2 channels (Configurable as inputs or outputs.)
Controller CAB7 / Input supply
100–240 V AC
Controller CAB7 / Network port
Gigabit Ethernet
Controller CAB7 / Digital inputs
16 channels
Storage / Long storage: humidity
45–65 % RH (Non-condensing.)
Complete set / Cabinet power cord
1 pc (When purchasing a complete set.)
Controller CAB7 / Digital outputs
16 channels
Operation / Control stick and App
Interlocked control (An unlocked control stick prevents App control.)
Robot cable / Minimum bend radius
81.6 mm (For cable-carrier routing; the suitable flexible cable must be agreed separately.)
Safety functions / SF9: TCP speed
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Controller CAB7 / Supply frequency
50–60 Hz
Robot cable / Robot cable diameter
10.2 mm (For cable-carrier routing; the suitable flexible cable must be agreed separately.)
Safety functions / SF14: Collision
350 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF26: TCP force
350 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF5: Joint speed
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF7: Joint power
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Storage / Long storage: temperature
25±10 °C (Non-condensing.)
Tool TIO V3.0 / Peak supply current
2 A (Peak duration not stated.)
Arm / Additional programming methods
SRCI, offline
Controller CAB7 / Dimensions W×H×D
41×30.7×23.5 cm
Recommendations / Duty cycle example
8 s motion + 2 s waiting (Exceeding80% motion duty can reduce gearbox life.)
Safety functions / SF6: Joint torque
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF11: TCP position
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF12: TCP mismatch
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Controller CAB7 / Additional protocols
PROFINET, EtherNet/IP (Software version1.7; also listed in the current EU table.)
Controller CAB7 / Remote power control
5–24 V (Power-on/off inputs; supports PLC connection.)
Safety functions / SF1: Emergency stop
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF22: Moving output
100 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF3: Safeguard stop
350 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF4: Joint position
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Complete set / JAKA product certificate
1 pc (When purchasing a complete set.)
Controller CAB7 / Operating temperature
0–50 °C
Safety functions / SF28: Momentum limit
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Complete set / After-sales warranty card
1 pc (When purchasing a complete set.)
Controller CAB7 / Analogue current input
4–20 mA
Safety functions / SF16: Safeguard input
350 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF17: Safeguard reset
350 ms (Function response time with App≥1.7; not a universal stopping time.)
Controller CAB7 / Analogue current output
0–20 mA
Robot cable / Maximum cable-carrier speed
2 m/s (For cable-carrier routing; the suitable flexible cable must be agreed separately.)
Safety functions / SF10: Tool orientation
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Tool TIO V3.0 / Continuous supply current
1 A
Safety functions / SF18: Reduced mode input
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF20: System stop output
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF25: Not-reduced output
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF23: Not-stopping output
100 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF24: Reduced mode output
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF13: Hand-guided TCP speed
350 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF27: Three-position enable
350 ms (Function response time with App≥1.7; not a universal stopping time.)
Controller CAB7 / Analogue voltage input/output
0–10 V
Controller CAB7 / Protective and emergency stop
Separate dual-channel inputs
Safety functions / SF21: Safeguard state output
350 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF2: External emergency stop
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Controller CAB7 / DO: continuous channel current
1 A (With the standard internal supply, no more than1.5 A in total.)
Robot cable / Maximum cable-carrier acceleration
5 m/s² (For cable-carrier routing; the suitable flexible cable must be agreed separately.)
Safety functions / SF19: Stop button state output
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Safety functions / SF15: Additional emergency input
250 ms (Function response time with App≥1.7; not a universal stopping time.)
Verified ecosystem
Software and resources
Official links and community projects are shown separately. Every published relationship has reviewable evidence.
0
verified official resources
0
verified compatible projects
0
public maintainers
No activity yet
latest verified ecosystem activity
Projects are ordered only within this robot ecosystem using verified compatibility, GitHub freshness and activity, and accepted community reports. This is not a global RobotSpace score.
Official resources
No first-party resource has been independently verified yet. Unverified catalog links are not shown as official.
Official software
No official software project has been verified yet.
Community projects
No verified community project has been linked yet.
Developers and contributors
No public maintainer profile is linked yet.
Verified activity
No verified project activity is available.
This ecosystem is still empty
The robot page remains useful for specifications while official resources and compatible projects are being verified.
Imported from the Unibot owner catalog · Not independently verified · Imported 2026-11-11 · Unibot source · Methodology