← Back to Robots
About Promobot V.4
Promobot V.4 is a mobile service robot for visitor interaction, presentations and prepared information services.
Manufacturer
🏢
Promobot
RU
Key Specifications
Weight
130 kg
Status
ACTIVE
Category
Promotional Robots
Audio / Speakers
2 units
Specifications / SDK
Available (For third-party developers)
Specifications / USB
Available
Audio / Speaker power
10 W (Each of two speakers)
Specifications / Arms
2 (Arm count; payload not published)
Specifications / Wi-Fi
802.11n (2.4 or5.0GHz coverage; at least4Mbit/s bidirectional internet)
Movement / Caster wheels
2 units
Specifications / Display
11.6 in (Touch LED IPS, 1920 × 1080 pixels)
Specifications / Runtime
≤480 min (Up to 8 hours; test procedure and operating mode unspecified)
Movement / Powered wheels
2 units
Network / Network latency
≤50 ms (Ping to the reference address under the manual requirements)
Movement / Caster diameter
2 in
Movement / Random movement
Supported
Specifications / Languages
Russian, English (Default languages)
Optional navigation / Lidar
Optional (Laser scanner in lower body; used with a prebuilt map)
Charging station / Clearance
At least 1 m left/right; 3 m in front (At least 700 × 700 mm space for one robot)
Specifications / Head motion
2 (Head degrees of freedom)
Specifications / Interaction
Dialogue (Conversation, answers and service information; content depends on the configured use case)
Specifications / Mains input
110–220 V (50–60 Hz; mains input voltage)
Communication / Speech output
Speech synthesis
Mechanics / Height adjustment
Supported
Specifications / Robot weight
≤130 kg (Upper bound; configuration and battery inclusion not separately specified)
Specifications / Room mapping
Optional (Navigation equipment package purchased separately)
Specifications / Stored faces
10 (Default number; additional expansion available)
Specifications / Torso motion
3 (Degrees of freedom; reduced to 2 with the passport scanner)
Charging station / Positioning
Fixed against a wall or attached to the floor (One station per robot; route to the station must remain clear)
Specifications / Body material
ABS plastic
Specifications / Maximum speed
0.72 km/h (Upper travel-speed limit)
Specifications / Touch sensors
4
Charging station / Station mass
10 kg
Indication / Segmented lighting
RGB LED
Network / Hidden Wi-Fi networks
Not supported
Specifications / Cable charging
≤480 min (Up to 8 hours; state-of-charge endpoints unspecified)
Specifications / Docking camera
640 × 480 px (Charging-station search; up to30fps)
Specifications / Emotion matrix
8.9 in (RGB matrix, 64 × 64 pixels)
Optional services / Telepresence
Optional
Cameras / Telepresence resolution
640 × 480 px
Movement / Powered wheel diameter
6.7 in
Optional navigation / Aisle width
≥1.7 m (For movement on a mapped route)
Optional services / Motion Studio
Optional
Optional services / SIP telephony
Optional
Specifications / Infrared sensors
16 (Obstacle detection)
Specifications / Station charging
≤600 min (Up to 10 hours; state-of-charge endpoints unspecified)
Audio / Omnidirectional microphone
Present
Mechanics / Arm degrees of freedom
7 (Table entry for two arms; distribution between arms is not specified)
Specifications / Power consumption
400 W (Measurement mode unspecified)
Optional navigation / Wall surfaces
No mirrors, transparent or dark absorbing areas (Within 40 cm above floor in the scanning area)
Specifications / Cards and terminal
Optional (Card dispenser and terminal bracket are optional; bank terminal and integration require separate configuration)
Specifications / Face search camera
1920 × 1080 px (Up to25fps)
Specifications / Maximum dimensions
71.6 × 206 × 158.5 cm (L×W×H; maximum envelope)
Specifications / Minimum dimensions
71.6 × 74 × 148.5 cm (L×W×H; minimum dimensions)
Specifications / Recognition camera
1280 × 720 px (Face recognition; up to30fps)
Specifications / Ultrasonic sensors
16 (Obstacle detection)
Operating environment / Illumination
≥50 lux
Charging station / Station dimensions
30 × 43 × 63.5 cm (L×W×H)
Manual package list / Main components
Robot, charging station and cable, transport case, wireless joystick and manual (Manufacturer list; commercial package is agreed separately)
Operating environment / Floor surface
Hard, flat, level, non-slip (No thresholds, steps, loose mats or soft surfaces; wheels have no suspension)
Optional equipment / Microphone array
Optional
Packaging / Gross mass with packaging
≤205 kg
Packaging / Transport case dimensions
101 × 92 × 164.5 cm (Maximum L×W×H)
Software platform / Built-in software
Promobot Core Software
Specifications / Printing and scanning
Optional (Photo/receipt printers, barcode/QR scanner and passport scanner purchased separately; functions require an application use case)
Movement / Approach to charging station
Automatic
Optional equipment / Temperature sensor
Optional
Optional navigation / Changes to layout
Requires remapping (When large objects are moved)
Operating environment / Room temperature
+10...+35 °C
Operating environment / Relative humidity
≤70 %
Communication / Linguistic database and analytics
Service access
Verified ecosystem
Software and resources
Official links and community projects are shown separately. Every published relationship has reviewable evidence.
0
verified official resources
0
verified compatible projects
0
public maintainers
No activity yet
latest verified ecosystem activity
Projects are ordered only within this robot ecosystem using verified compatibility, GitHub freshness and activity, and accepted community reports. This is not a global RobotSpace score.
Official resources
No first-party resource has been independently verified yet. Unverified catalog links are not shown as official.
Official software
No official software project has been verified yet.
Community projects
No verified community project has been linked yet.
Developers and contributors
No public maintainer profile is linked yet.
Verified activity
No verified project activity is available.
This ecosystem is still empty
The robot page remains useful for specifications while official resources and compatible projects are being verified.
Imported from the Unibot owner catalog · Not independently verified · Imported 2026-11-11 · Unibot source · Methodology