Robot / Mass
29 kg (Measurement basis and battery inclusion not specified)
Charger / Input
100–240 V AC
Network / Wi-Fi
IEEE 802.11a/b/g/n/ac
Robot / Humidity
<80 % (Operating environment)
Robot / Location
Indoors (Dry, hard, level floor; avoid strong direct light)
Sensors / Lasers
6; Class 1M
Network / Printer
On the same LAN (Configured in application; compatible printer model not specified)
Robot / Body ports
SD-card slot; headphone jack (Card format and jack diameter not specified)
Robot / Indicators
Shoulder LEDs
Charger / Connection
Manual; rotate until click
Pepper+ tablet / SIM
nanoSIM (Not included; inserted at tablet top edge)
Robot / Clear radius
≥90 cm (Clearance around robot; not arm reach)
Charger / Full charge
Approximately 6 h (Guideline in shared Pepper/Pepper+ guide)
Charger / Power cable
1.75 m
Charger / Temperature
−5…+40 °C (For charger)
Network / Wi-Fi bands
2.4 and 5 GHz
Robot / Charging flap
Wheels disabled while open
Sensors / Pulse width
<15 ms (Laser component)
Robot / Control button
On chest (Power, notifications and rest mode)
Robot / Emergency stop
Rear-neck button (Immediate power cut)
Sensors / Sensor types
3D; sonar; IR; horizontal and vertical laser (Blind zones exist; IR may miss dark objects)
Sensors / Touch sensors
Head and hands (Head zones A/B/C; behaviour depends on application)
Charger / Output current
8.0 A
Charger / Output voltage
29.2 V DC (At full charge; charger specification)
Network / Wi-Fi security
WEP 64/128 bit; WPA/WPA2/WPA3
Robot / Operating region
Japan (The manual does not envisage use overseas)
Sensors / Motion control
Arm self-collision avoidance; balancing (Operating-space requirements still apply)
Job media library / Audio
MP3/OGG (OGG automatically converted to MP3)
Job media library / Video
MP4, 1920×1080
Job media library / Images
GIF/JPG/JPEG/PNG, 2048×2048 px (RGB; CMYK unsupported)
Pepper+ tablet / Processor
MediaTek Helio G88, octa-core
Pepper+ tablet / Tablet OS
Android (Body control and tablet computing are separate)
Sensors / Laser wavelength
808 nm
Network / Hidden 5-GHz SSID
W52 (When connecting to a hidden 5-GHz SSID)
Robot / Preventive charging
Guideline: weekly (Before low-voltage lock activates)
Sensors / Obstacle response
Slowing or stopping (Subject to sensor coverage; clear operating space required)
Charger / Dimensions D×H×W
204×45×104 mm (Component; not robot dimensions)
Job media library / Filename
Up to 100 characters (No spaces or symbols; duplicate filenames not accepted)
Robot / Service introduction
2 February 2026
Pepper+ tablet / Front camera
Top centre in landscape orientation
Pepper+ tablet / Tablet model
Lenovo Tab K11
Robot / Operating temperature
5…35 °C
Charger / Mass including cable
1.36 kg
Robot Suite and jobs / Reports
Daily and monthly; CSV (Available data depend on NAOqi version)
Included equipment / Main items
Pepper+, charger and power cable
Job media library / Audio codec
AAC-LC (Recommended export)
Job media library / Video codec
H.264 AVC (Recommended export; Baseline/Main)
Robot Suite and jobs / Job logic
Scheduling, menus, questions, branches and jumps (Configurable job-generator 3.0 blocks)
Job media library / Audio bitrate
≤320 kbps (Recommended export)
Job media library / Per-job total
100 MB
Job media library / Video bitrate
≤10 Mbps (Recommended export)
Network / Connection restrictions
WISPr and mandatory proxy unsupported (Port-restricted networks are also unsuitable)
Pepper+ tablet / Display diagonal
10.95″
Robot / Storage after full charge
Recharge after approximately 3 months (Manual guidance when leaving a fully charged robot unused)
Job media library / Per-file limit
50 MB
Network / Face-recognition traffic
3 MB/min (Only while a person is detected and the feature is used)
Pepper+ tablet / Mobile connection
Via tablet SIM (The documented procedure disables Wi-Fi; Wi-Fi is recommended)
Included equipment / Transport pins
Metal waist pin; plastic knee pin (Retained for transport and faults)
Job media library / Video frame rate
≤30 fps (Recommended export)
Robot Suite and jobs / Job-box limit
1000 (Actual limit may be lower depending on environment)
Sensors / Maximum accessible emission
<9 mW (Laser component)
Robot Suite and jobs / Job positioning
Move-to point; marker-based home position (Distance and angle configured in the job)
Robot Suite and jobs / Analytics export
Approximately 40,000 rows (Per CSV export)
Robot Suite and jobs / Fleet management
Applications, jobs, accounts and groups (Availability depends on service; job management requires generator 3.0)
Robot Suite and jobs / Analytics history
Previous 3 months (Robot Suite interaction analytics)
Robot Suite and jobs / Remote monitoring
Status, health checks and error history (Robot Suite service)
Robot Suite and jobs / Visitor interaction
Speech, screen, AI dialogue and remote operator (Functions of configured content and service; not all options necessarily included)
Included equipment / Documentation and packaging
Accessory box; quick setup guide